Vintage Button Ornament and Garland ~ A Nancyfangles Whimsical Creation
When contemplating my next Christmas Creation I was trying to think of something that everyone would already have in their home or could easily find in a thrift shop or craft retailer. Buttons came to mind… I thought I would try threading buttons on wire and then shaping it into an ornament. After figuring out the easiest way to do it, I created a heart to hang on the tree. I loved it so much that I decided to try a garland as well. For the garland I used buttons in shades of white and added pearl beads as an accent. I Love how they turned out and I hope that you do too!
Wire thin enough to fit through the button holes, I used 24 gauge.
A selection of buttons in mixed or similar colors.
Cut a piece of wire long enough to bend into a shape.
Leave about a two inch length of wire on one end and thread the long end up through the bottom of the button and then back out through the front. Pull the wire tightly.
Thread the long end up through the next button and pull the button down until it touches the first one.
Thread the wire back through the front and out the back of the second button, pulling tightly to keep the buttons close together.
Continue this process until you get the desired length. Make sure to save an inch or two on the end.
The hardest part is keeping the wire from twisting while pulling it tightly.
I also found it easiest to hold the short end closest to me and work out away from myself (hope that makes sense).
When you reach the desired length, bend the wire into the shape you desire.
If you are forming a heart, tightly twist the two ends together to form the point.
Twist another small piece of wire onto your ornament to use as the hanger.
You can create shapes, or even letters, be creative and use your imagination…
*For the garland I used the same technique but added in some pearl beads, and formed hooks on each end of the wire to hang.
⭐A Star Spangled Banner⭐
I recently recovered some chairs in my home and wanted to do something “fun” so I decided to cover my seats, with the seats from old pairs of jeans. I love how the chairs turned out, and when I was finished I was left with 4 denim legs. Since they were dark, denim blue, I decided I would use them to create something for the Fourth of July. The design really came together when I visited a local thrift shop and found some red felt and fabric star patches. This Star Spangled Banner is one of two patriotic designs I created for your Fourth of July décor…
Blue Denim fabric
White triangular trim (you can use whatever wide, white lace you have on hand)
Star patches (cut outs)
Two pieces of red lace
Hot glue gun and glue
Cut a triangle pattern out of cardboard.
My triangles are 6 inches long from top to point and 5 inches wide at the top.
Trace the triangle pattern onto your fabric and cut out as many as you like.
I cut out 13 triangles, 7 red felt and 6 denim and created a 6 foot banner.
Fold the lace in half lengthwise (iron) and glue the top of each triangle side by side, to the back of the lace.
Fold over the front of the lace and glue to the front of the triangle.
Glue on stars.
Run a thin line of white glue along the back edges of the denim triangles to keep from fraying.
Fold the two pieces of red lace in half to form a loop and glue one to each end of the white lace to hang.
Hang and enjoy!
Denim and lace - fabric flag
These fabric flags are a great way to use up scraps of denim fabric and left over pieces of lace or ribbon and they are easy to create. I used different widths of lace in red and white. 7 red and 6 white. I used hot glue to attach the lace to the denim, but you could machine or hand stitch them as well. Let me tell you how…
One rectangle of denim (approx. 11”x 8”)
4 pieces of red ribbon 32 inches long
3 pieces of red ribbon 48 inches long
3 pieces of white lace 32 inches long
3 pieces of white lace 48 inches long
1 piece of white lace approx. 35 inches long (for hanging)
1 piece of white lace 8 inches long
Hot glue gun and glue
Fabric star patches or cut out stars (I used 18 because they fit nicely)
Start by folding the denim over the dowel (approx. 3 inches, leaving an 8”x 8” square) and glue it to itself.
Fold one of the 32 inch pieces of red lace in half and glue the folded part to the bottom, back of the denim vertically and even with the outside edge. Fold one of the 32 inch pieces of white lace in half and glue beside the red one…
Repeat this process until you have the 4 red and 3 white 32 inch pieces glued vertically from the bottom of the denim square.
Glue the 8 inch piece of white lace across the bottom of the denim to cover the glued part of the vertical pieces of lace that you just attached.
Fold a 48 inch white piece of lace in half to form a loop, loop it back around the dowel and bring the ends through. Pull to tighten. Repeat until you have 3 white and 3 red 48 inch pieces attached.
Fold the 35 inch piece of white lace in half and form a loop, tie a knot at the top of the loop to hang it from.
Tie one end of the same piece of lace to one side of the dowel and the other end to the other side of the dowel, (be sure it is even on both sides) allow some extra to hang down from the knots.
Glue on the stars. Hang and enjoy!
~ Count Your Blessings ~
Welcoming the New Year
We all know what an unusual year 2020 was, so rather than relive the past year I prefer to look forward to a
New Year full of big blessings and pleasant possibilities.
When I was trying to figure out what I would make for the new year’s column I wasn’t sure exactly what I wanted to create, but I knew I wanted it to be something that would help us focus on the good things that the new year has to offer. The surprises that we meet along the way, the blessings we receive and the memories we share.
Together with my family we all came up with our own little piece of this creation. A Blessing Box.
I hope you will enjoy creating one of your own, that you will use it and that it will help you to realize that no matter how things look there are always blessings to be found in the smallest of gifts,
be it a smile, a beautiful bird, a kind word, or an extra hour of sleep.
May you have a Happy, Healthy New Year filled with love.
A coffee can, a shoe box, a cookie tin, any container with a lid
Paper, fabric, paint
Stencils, stickers, markers
A cabinet knob, a large washer, a bolt
Clean your container and dry thoroughly
Cut out paper, fabric or vinyl to cover the labels, or paint the container
Cut out the number 2021, stars, rainbows? Make it festive…
Attach them to the container
Carefully push the screw of the cabinet knob through the top of the lid
Bring it through a large washer (to prevent it from pulling back up through the lid)
And bolt it on
- Anytime something good happens in 2021, jot it down on a piece of paper and put it in the box.
But don’t wait until the end of the year to look at them! Any time you’re feeling low or you just need a smile,
pick a blessing or two and read them! May your Blessing Overflow this Year ♥
Mini Pumpkin Pail Makeover
A Nancyfangles Whimsical Creation
Who wouldn’t like a fall décor project that’s easy to make, inexpensive to buy and cute as can be?
Believe it or not, these little pumpkin centerpieces started out as orange, plastic, mini jack-o-lantern treat buckets! A little paper ribbon and lace, some dollar tree foliage and pinecones and a little imagination transformed them into these mini fall centerpieces that you can use right through Thanksgiving.
Let me tell you how...
Mini treat bucket (you can get them at Walmart for 76cents)
Small piece of floral foam
Paper ribbon Lace
Cut 3 pieces of paper ribbon long enough to wrap around the pail from top to top, leaving a few inches to tuck inside at the top on either side.
Untwist the paper ribbon but leave a small gather on each side.
Put two glue dots on one end of the paper ribbon, tuck inside and attach to the inside of the pail.
Tightly pull the ribbon down the side, underneath and back up to the top of the pail, tuck in and attach with glue dots.
Repeat two more times over-lapping the sides of each piece of paper ribbon, onto the previous one.
Repeat the same steps with the lace, using one glue dot on each end, and running the lace down the center of each piece of paper ribbon.
Using E6000, glue the floral foam into the bottom of the pumpkin and let dry
Poke foliage into the foam and glue the pine cone to the inside, front of the pail.
That’s it -easy as pie!
*Family Fun Flameless Fireworks*
Present your Patriotic Pride with a “POP”
The whole family can get in on the action with these flame-less DIY fireworks.
A fun recycled project for star spangled crafters of all ages.
Supplies: Empty toilet tissue or paper towel roll
An 11 inch balloon
Scrap paper, junk mail, gift wrap
Heavy duty tape
Double sided tape for decorating
Paper punch (I used a star punch) or Confetti (if you prefer not to make your own)
Instructions: Building your “Popper”
Tie a knot towards the neck of your balloon.
Cut about 1/3 of the rounded end of the balloon off and discard.
Stretch the knotted end of the balloon over one end of the cardboard roll and tape to secure.
Confetti: Punch shapes out of scrap paper, junk mail or gift wrap...any paper product will work.
I used junk mail envelopes and pieces of left over paper from other craft projects including a gift bag.
Feel free to skip this step and buy confetti if you wish.
Decorate: We used pieces of scrap paper including some of the strips we punched the confetti out of.
Double sided tape was the easiest adhesive to use as you do not have to wait for dry time.
Decorate as desired, we used stamps and confetti pieces to decorate ours with a patriotic theme.
Hold roll up-right with balloon end down.
Drop confetti loosely into the roll.
Do not over-pack.
Firmly grasp roll and hold at about a 45 degree angle, aiming away from faces.
Draw back the knot and let it go!
Refill and Repeat!
Decorate differently for other occasions and make your party “POP”
Warning: Balloon pieces can be a choking hazard for small children and animals.
Discard any cut or broken pieces at once.
Do not let children put balloons in their mouths or leave children unattended with uninflated balloons..,
Summer will soon be here and I think everyone is looking forward to getting out into their yards and gardens, including our fine feathered friends. I wanted to make some unique bird feeders and since I haven’t had the pleasure of “thrift”therapy in quite sometime, I decided to see what kind of treasures I had stashed away in my collection. When I came across these metal fixtures a "light bulb" went off in my head, and I knew what I would create.
I will walk you through the process of how I created mine, but how you make yours will depend on what supplies you have. Look around your house and see what treasures you may have to work with... Happy Creating!
Wall Sconce Bird Feeder Supplies:
A wall sconce (Any wall sconce will do, it can be one that had an electric light or a candle)
A mini pie pan
A vintage Jell-O mold or baking tin
Clean all of your components to remove soils and oils.
Mine had a light so I cut off the wires and snipped off the bulb holder
I glued the Jell-O mold to the center of the pie pan and allowed it to dry
I then glued the pie pan to the sconce, and allowed it to dry
Hang from your favorite garden gate or tree, fill with bird food and enjoy!
Vintage Light Fixture Bird Feeder Supplies:
Vintage light fixture
Buttons and beads
Clean all of your components to remove soils and oils
Remove all electrical wiring
I removed the hardware and turned the top of the fixture upside down to use as a roof
I glued the desert cup to the center of the saucer and set aside to dry
I attached the hanging hardware, and covered up my mechanics by screwing and gluing on beads
I also covered the top hardware with buttons
I glued the saucer to the light fixture and allowed to dry thoroughly
Now it is ready to fill and enjoy!
I hope these will inspire you to create your own whimsical bird feeder...
Quick and Easy -DIY-Bunny Finger Puppets
These little bunny friends are made of scrap fabrics and embellishments you may have on hand.
Grab the supplies and the kids and have a little Creative Easter Fun...
Any scrap fabrics available...
I used felt, denim and cotton prints
Hot glue gun/ glue(for parental use only please!)
Embellishment mix such as buttons, sequins, pipe cleaners, sharpie markers
Measure around your child’s finger leaving a large seam allowance on both sides and on top
Use the pattern to cut out two identical pieces of fabric, a front and a back piece
Cut out ears from fabric, or use pipe cleaners bent into ears
Using the glue gun, glue the bottom of the ears onto the inside top, of the back fabric piece
Run a line of glue over the front bottom of ears and down one side of the back piece of fabric
Line up the front piece of fabric and stick to the back piece where you just ran the glue
Repeat on the other side to finish bunny body
This is where the kids come in: Create Funny Bunny faces using buttons, embellishments and fabric scraps,
Let Mom or Dad do the gluing!Have a Hoppy Easter
Stuffed Fabric Easter Eggs
After making the Bunny Finger Puppets, I had left over fabric scraps and decided to play.
I came up with these cute little Stuffed Fabric Easter Eggs, and wanted to share them too!
Needle and thread (optional)
Hot glue gun/ glue(for parental use only please!)
Draw an egg pattern onto fabric and cut out 2 identical pieces
Design a pattern with fabric pieces and/or embellishments and glue(or sew)them onto the front piece of the fabric
Sew around the edges and top leaving the bottom open for stuffing.
Stuff, and then sew the bottom closed
Instead of sewing, you can glue your egg together the same way you did the Bunny Puppets,
but I like the stitching effect around the edges.
This is a Great opportunity to Create with your family!
Stay Safe, Stay Home and Have a Happy Easter🐇
Terracotta Bell ~or~ Spring Ding-a-ling
A Nancyfangles Whimsical Creation
I know that I have mentioned the versatility of Terracotta pots on several occasions.
This design is sure to get you seeing things from another perspective...Upside-down that is!
This terracotta bell will add a touch of whimsy to an outdoor garden space, a porch, a patio or even indoors.
You can decorate it with a garden motif, something fabulous for fall, or a charming Christmas design...
Supplies: Terracotta pot (I used a mid-sized pot, but wouldn’t a tiny-terracotta bell be so cute?!)
Along piece of strong cording, twine, yarn... (Better to be too long, than too short)
A vintage Jell-O-mold or similar
2 beads, one large for top, one medium for inside
Some kind of flat piece to use as the clapper (I used a decorative shell flower-a button would work)
A flat washer or large flat button (that will fit inside the top of the bell)
(a small lid with a hole in the middle would work)
Technique: Clean, paint and decorate your pot. (Make sure to invert it before decorating)
I decoupaged my pot but you can paint yours, cover it in fabric or mosaic? Use your imagination!
Make a hole in the bottom of the Jell-O mold (make sure your cord will fit through it)
Fold cord in half to form a loop and tie a knot a few inches down to form the hanger.
Thread un-looped ends of cord through a large bead, and down through the hole in the terracotta pot.
Thread cord ends through washer (or button) and then through the second bead.
Tie a knot as close to the bead as possible to tighten everything up.
Thread cord ends through the hole in the Jell-O mold and adjust mold to hang down enough so that you can see it, and so it can easily swing to hit the inside of the pot
Tie another tight knot to hold it in place.
Leave enough cord to form a small loop and tie one last double knot in the cord.
Cut off any excess cord
Thread a piece of monofilament through the hole in the clapper, and through the loop in the cord.
Adjust the clapper so It will hang below the Jell-O mold allowing it to catch the breeze
and tie the monofilament in a tight knot to secure. Trim excess.
Hang and Enjoy!
*(Find my decoupage technique in my July 31st column or contact me at:
~ Rustic Valentine Wreath ~
A One of a Kind Nancyfangles Design
Circles have long been recognized as a symbol of infinity - having no beginning or end. A great example is the wedding band, a sign of never-ending love. It was that symbolism that inspired me to create these rustic valentine wreathes. Pulling my components together I started with traditional valentine trimmings such as hearts and lace. The scrabble pieces reminded me of the nostalgic conversation hearts that came in a box and donned simple messages like “Love you”, “Hugs” and “Kisses” and the vintage buttons and reclaimed jewelry pieces served as the icing on the proverbial valentine cupcake. Although jewelry, flowers, chocolate filled hearts and candy kisses may be customary valentine gifts, these rustic little wreathes will be an endless reminder of your love and will still be around long after the chocolate is gone.
Supplies and Instructions:
6” grapevine wreath (or similar)
Reclaimed jewelry pieces
E6000 or similar glue (always use glue in well ventilated area)
Begin by cutting a piece of twine (approx. 10 inches). Fold it in half and pull the two loose ends around the wreath and back through the folded end pulling tightly to secure. Wrap a piece of twine around the wreath several times to add a decorative accent. Use glue to hold in place. Lay burlap over wreath and cut to size being sure to leave enough overlap to glue into place. Run a line of glue around the back of the wreath and glue the Burlap into place. Let dry. Run a gathering stitch on the bottom of a piece of lace, gather into a flower and knot to secure. Arrange your components onto the wreath until you get a design you like. Glue your pieces on one at a time and set aside to dry. Give to a Loved one or keep for yourself!